Reseach and Application of Dynamic Sanding Prediction in Donghe Oilfield
Received date: 2007-11-09
Revised date: 2008-01-14
Online published: 2008-02-10
Donghe Oilfield of the Tarim Basin is an ultra deep sandstone reservoir. The compaction of formation rock is good. According to prediction study and pilot tests, it would not produce sand. However, after it was put into production, sand production gradually occured, and became more and more serious year by year, owing to the significant reservoir pressure drawdown and water-cut increase. How to dynamically predict the sand production according to the changing reservoir conditions during the reservoir development is a key issue both in theory and in practice.This paper proposes two modification factors and which reflect the influence of pressure drawdown and water-cut increase respectively. Using the revised formula, the calculation results and prediction conclusions match the reservoir situations very well. The proposed new idea and method provide a valuable reference to sand control of other sandstone reservoirs.
Key words: Production rate; Sand production; Sand controal; Physical model.
QI Da-sheng,PEI Bai-lin . Reseach and Application of Dynamic Sanding Prediction in Donghe Oilfield[J]. Natural Gas Geoscience, 2008 , 19(1) : 133 -136 . DOI: 10.11764/j.issn.1672-1926.2008.01.133
[ 1 ]何厚生,张琪.油气井防砂理论及其应用[M].北京:中国石化出版社,2003.
[2]Harun A,Kel Kar M G. Two-phase pressure drop predictions across gravel pack[R]. SPE 37512. 1997.
[3]Oyeneyin M B. Optimum gravel sizing for effective sand control[R]. SPE 24801. 1992.
[4]Yidiz T,Langlinals J P. Calculation of Pressure losses Across Gravel packs[R]. SPE 17167. 1988.
[5]董长银,张琪,曲占庆,等.筛套环空砾石层压降的简化计算模型[J].石油大学学报:自然科学版,2001,25(2):28-30.
[6]董长银,张琪,李志芬,等.筛管砾石充填井筒附近压降计算方法[J].西安石油学院学报:自然科学版,2002,17(2):33-36.[7]顾海洪,李金发,邱锐,等. 压裂防砂工艺的研究及应用[J].油气地质与采收率,2003,10(3):76-77.
[8]焦国盈,赵立强,刘平礼,等. 压裂充填井产能预测的分析方法[J].海洋石油,2005,25(1):38-40.
[9]李爱芬,姚军,寇永强. 砾石充填防砂井产能预测方法[J].石油勘探与开发,2004,31(1):103-105.
[10]绕鹏,冯胜利,谷晓峰,等.青海涩北气田第四系疏松粉砂岩气藏防砂工艺试验研究与评价[J].天然气地球科学,2006,17(2):196-200.
[11]王鸿勋,张士诚.水力压裂设计数值计算方法[M].北京:石油工业出版社, 1998.
[12]周福建,杨贤友,能春明,等.涩北气田纤维复合高压充填无筛管防砂技术研究与应用[J].天然气地球科学,2005,16(2):210-213.
[13]Robert C B,Stephen R,Eric R D. Comparsion of numerical and analytical in inflow performance modeling of gravel packed and frace packed wells[R]. SPE 31102, 1996.
/
〈 |
|
〉 |