MICROFACIES CHARACTERISTIC OF YANCHANG FORMATION  IN ANSAI DISTRICT

Expand
  • 1.Institute of Resources, Chang'an University, Xi'an 710054, China; 2.Department of Geology, Northwest University, Xi'an 710069, China; 3.No.1 Oil Producing  Plant, Changqing Oilfield=Branch Company, Yan'an 716000, China

Received date: 2004-05-24

  Revised date: 2004-07-28

  Online published: 2004-10-20

Abstract

According to the outcrops observing and the cores describing,Yanchang  formation has been classified 9 petrology facies and 6 petrology facies units. On the basis of establishing the model between petrology and electricity, the types of the electrofacies have been analyzed. Connecting the petrology facies with the electrofacies, the types and the characteristics of the  sedimentary microfacies in Yanchang formation have been studied. It indicated that Chang 2 belong to the braided river facies, Chang 3 and Chang 10 are the  meandering fluvial facies, Chang 9,Chang 7 and Chang 4+5 are lacustrine facies, while Chang 6 and Chang 8 are front-delta facies. The sand bar microfaces and the  distributary channel microfaces are the good reservoir. They led to the directions of oil and gas exploration and development.

Cite this article

ZHAO Hong,DANG Ben, LI Wen-hou,YANG Xiao-qi, DANG Yong-chao . MICROFACIES CHARACTERISTIC OF YANCHANG FORMATION  IN ANSAI DISTRICT[J]. Natural Gas Geoscience, 2004 , 15(5) : 492 -497 . DOI: 10.11764/j.issn.1672-1926.2004.05.492

References

[1]蔺景龙,许少华,孙文德,等.沉积微相测井识别[J].大庆石油地质与开发,1997,16(2):71-74.
[2] 李军,张超谟.利用测井资料分析不同成因砂体[J].测井技术,1998,22(1):20-23.
[3]李友强,文志刚,李维峰,等.华池油田152井区长33砂组沉积微相研究[J].天然气地球科学,2004,15(2):201-204.
[4]陈波,李孝军.油田开发阶段砂岩储集层横向对比及预测方法[J].石油勘探与开发,2000,27(1):95-97.
[5]张金亮,李恕军,靳文奇,等.安塞油田侯市地区长6油层沉积微相研究[J].西安石油学院学报(自然科学版),2000,15(4):1-7.
[6]陈程,孙义梅,邓宏文.油田开发后期扇三角洲前缘微相分析及应用[J].现代地质,2001,15(1):88-93.
[7]何顺利,郑祥克,魏俊之,等.沉积微相对单井产能的控制作用[J].石油勘探与开发,2002,29(4):72-73.
[8]陈钢花.陕甘宁盆地三叠系延长组测井-沉积微相研究[J].中国海上油气(地质),2002,16(1):54-57.
[9]唐海发,赵彦超,汪立君.胜坨气田明化镇组下段沉积微相特征及其与储层物性的关系[J].天然气地球科学,2004,15(3):257-260.

Outlines

/